MIL-C-38999 (I & II)

Browse Isodyne’s MIL-spec EMI/RFI backshells that interface with Connector Designator F and built to MIL-C-38999, Series I & II specification design standards.

This specification covers miniature, high density, circular, environment resistant electrical connectors with removable crimp contacts, or hermetically sealed electrical connectors with fixed, nonremovable contacts. Both environment resistant and hermetically sealed connectors are available with bayonet, threaded, or breech-coupled mating systems. Connectors are capable of operating within a temperature range of -65°C to +200°C maximum.

All MIL-C-38999 series include rear release removable pin or socket contacts with crimp termination. All MIL-C-38999 series include hermetically sealed receptacles with fixed pin or socket contacts with solderable solder cup, eyelet or feed-thru terminations. All MIL-C-38999 series are designed to assure proper orientation of the mating halves prior to electrical engagement. All series include EMI shielding capability. Series I & III connectors have conductive finishes that provide electrical continuity between mated shells prior to contact engagement and have the contacts so located as to be protected from handling damage and inadvertent electrical contact. MIL-C-38999 Series II connectors provide a low silhouette for minimum size and weight, and include connectors which provide shell-to-shell electrical continuity when mated.

Series I, II, III, and IV connectors are not interchangeable or intermateable.

MIL-C-38999 Series I

Scoop-proof, bayonet coupling, (inch-pound dimensions and measurements).

MIL-C-38999 Series II

Non-scoop-proof, bayonet coupling, low silhouette, (inch-pound dimensions and measurements).

For Quotes or Questions Call - 316-682-5634


Showing all 11 results

11