Browse Isodyne’s MIL-spec EMI/RFI backshells that interface with Connector Designator X and built to MIL-C-81703, Series II specification design standards.
CONNECTOR DESIGNATOR X MIL-C-81703 (II) MIL SPEC CIRCULAR BACKSHELLS
Showing all 6 results
-
ISO 150 Series Backshell
150 Series Circular BackshellThe Isodyne ISO 150 Series (REV. AF) EMI/RFI circular connector backshells offer a single banding surface. Interfaces with MIL-C-26482, D38999 Series I,II,III,IV and more. Available in straight, 45 and 90 degree angular functions with superior EMI/RFI protection for military and commercial application.
$0.00 Details -
ISO 155 Series Backshell
155 Series Circular BackshellISO 155 SERIES ( REV. K ) EMI/RFI circular connector backshells offer a single banding surface and a Quick-Tie strain relief. They are available in straight, 45 and 90 degree angular functions. Interfaces with MIL-C-26482, D38999 Series I,II,III,IV and more.
$0.00 Details -
ISO 160 Series Backshell
160 Series Circular BackshellISO 160 SERIES ( REV. K ) EMI/RFI circular connector backshells offer two banding surfaces for double gross over braid requirements. It is available in straight, 45 and 90 degree angular functions and in reverse bayonet. They interface with MIL-C-26482, D38999 Series I,II,III,IV and more.
$0.00 Details -
ISO 165 Series Backshell
165 Series Circular BackshellISO 165 SERIES ( REV. K ) EMI/RFI circular connector backshells are similar to our 160 series while adding Quick-Tie strain relief. These are available in straight, 45 and 90 degree angular functions and in reverse bayonet coupling. They interface with MIL-C-26482, D38999 Series I,II,III,IV and more.
$0.00 Details -
ISO 170 Series Backshell
170 Series Circular BackshellISO 170 SERIES ( REV. E ) EMI/RFI connector backshell is a low profile, two piece design with a single banding platform. The two piece design allows for easier repair service in the field while the low profile offers additionally space savings over our standard back shells. They interface with MIL-C-26482, D38999 Series I,II,III,IV and more.
$0.00 Details -
Shorting Cap Backshell
40M3827Protect your backshell connectors from debris when not in use with Isodyne Shorting Cap Backshells. Variable body and lanyard lengths to best fit your application.
$0.00 Details