Why to Buy

The Isodyne Spring Band Adapter is intended for the termination of cable shield braid to military or commercial connectors. The Isodyne Spring Band Adapter has a number of advantages over other products used for this purpose, making it the ideal choice for your application.

1. The spring band can be applied without tools.
2. The spring band can be removed without tools.
3. The spring band may be removed and reused up to 1,000 times, thus allowing a high degree of reparability.
4. The spring band has a pre-set compressive force and so needs no external calibration.
5. * Spring band produces a DC contact resistance at 20 degrees Celsius of less than 1 milliohm, due to 360 degree contact with the backshell.
6. * Tensile Force to pull off braid exceeds 120 lbf. When used in combination with conventional heat shrink strain relief, tensile force required to remove is in excess of 250 lbf.
7. * The spring band's electrical and mechanical characteristics are unaffected by vibration, shock and temperatures between -65 and 150 degrees Celsius.
8. The spring band is available for use in corrosive atmospheres.
9. * The spring band can be used with single, double, or individual braids.
10. The spring band can be used to produce backshells with braid tails, without the use of swaging equipment, in the factory or in the field.

* When used in combination with backshells designed specifically for use with the Isodyne Spring Band Adapter.